Skip to content
Epoxy Panda — Concrete Coating Systems

Service area

Concrete Floor Coatings in Westlake, TX

Epoxy Panda installs residential and commercial concrete coating systems in Westlake, Texas. That includes a four-car garage floor we completed in Westlake, and every project starts with a free estimate.

Garage Floor Coatings in Westlake

Many garage floors begin as unfinished or stained concrete. Epoxy Panda prepares the concrete mechanically, repairs cracks and pits, and then installs a system suited to how the garage is used.

Our standard garage system is a resin base coat (epoxy or polyurea), a full decorative flake broadcast and a polyaspartic clear topcoat. A solid color system is available for a uniform look without flake. North Texas heat and sun are part of the specification, which is why the clear topcoat matters.

We completed a four-car residential garage in Westlake of approximately 850 square feet. The concrete was bare, with normal vehicle staining, minor cracks and surface discoloration. We mechanically diamond-ground the entire floor, prepared the edges and repaired the appropriate cracks and surface defects before installing a full-flake system in a black, gray and white blend with a clear polyaspartic protective topcoat.

The large garage needed a floor that looked finished without becoming visually busy. The neutral blend created consistent visual interest across the larger floor area while keeping the garage clean and understated.

Learn more about garage floor coatings, flake floor systems and solid color coatings.

Patio & Outdoor Concrete Coatings in Westlake

Existing concrete patios, covered patios and pool decks can be coated without tearing out the slab. Outdoor systems are selected for sun, weather, drainage and wet traction, and the concrete is mechanically prepared and repaired first.

Learn more about patio and outdoor concrete coatings.

Commercial & Industrial Floor Coatings in Westlake

A commercial floor is specified around traffic, vehicles and equipment, cleaning methods, chemical exposure, traction, the condition of the concrete, facility access and return-to-service time. Larger projects can be phased so a facility keeps operating.

Commercial work in Westlake includes warehouses, automotive and service shops, retail spaces, offices, maintenance facilities, light industrial spaces and property management portfolios.

Warehouse floor coatings are large-area systems for storage and distribution floors.

See commercial floor coatings and warehouse floor coatings.

Decorative & Specialty Floor Systems in Westlake

The finish is chosen separately from the space, and each one behaves differently once it is installed:

Concrete Coating Systems Available in Westlake

Concrete Surface Preparation

Surface preparation decides how well a coating lasts. We use diamond grinding to remove contamination, weak surface material and incompatible coatings, and we repair cracks and pits before anything is installed.

Grinding does not fix everything. Moisture, oil contamination and structural problems are assessed at your estimate, because a coating applied over them can fail. See concrete grinding & preparation.

Concrete Floors and Properties in Westlake

Large residential garages are common in the type of Westlake properties we work in.

A large garage can receive substantial sunlight through open garage doors, so UV exposure at the garage entrance is considered when selecting the finished system.

Westlake Concrete Coating FAQs

Do you install garage floor coatings in Westlake?

Yes. Epoxy Panda installs garage floor coatings in Westlake, Texas. Every garage is mechanically prepared first, and the system is chosen for how the garage is used.

Do you install commercial floor coatings in Westlake?

Yes. Epoxy Panda installs commercial floor coatings in Westlake, Texas. The system is specified around traffic, cleaning, chemical exposure and how the facility operates, and larger projects can be phased around ongoing operations.

What coating is best for a Westlake garage?

It depends on the concrete, how the garage is used and the look you want. Epoxy Panda’s standard garage system is a resin base coat (epoxy or polyurea), a full decorative flake broadcast and a polyaspartic clear topcoat. A solid color system suits a uniform look without flake.

Do you grind concrete before coating it?

Yes. Mechanical preparation such as diamond grinding is a standard part of Epoxy Panda coating projects, because a coating bonds to prepared concrete, not to dust, old sealer or weak surface material.

How do I get an estimate for a project in Westlake?

Fill out the online estimate form. We text to confirm and ask for a few photos, then visit for a free in-person consultation and give you a written estimate.

Concrete Coating Service Areas Near Westlake

Get a Free Concrete Coating Estimate

Tell us about your Westlake project. We text to confirm, ask for a few photos, then visit for a free in-person consultation and a written estimate.