Skip to content
Epoxy Panda — Concrete Coating Systems

Service area

Concrete Floor Coatings in Colleyville, TX

Epoxy Panda installs residential and commercial concrete coating systems in Colleyville, Texas. That includes an oversized three-car garage floor we completed in Colleyville, and every project starts with a free estimate.

Garage Floor Coatings in Colleyville

Many garage floors begin as unfinished or stained concrete. Epoxy Panda prepares the concrete mechanically, repairs cracks and pits, and then installs a system suited to how the garage is used.

Our standard garage system is a resin base coat (epoxy or polyurea), a full decorative flake broadcast and a polyaspartic clear topcoat. A solid color system is available for a uniform look without flake. North Texas heat and sun are part of the specification, which is why the clear topcoat matters.

We completed an oversized three-car residential garage in Colleyville of approximately 700 square feet. The existing concrete had vehicle staining, minor pitting and an inconsistent appearance across the garage. We mechanically diamond-ground the slab, prepared the perimeter and repaired the appropriate pits and surface defects before installing a full-flake system in a tan, beige and gray blend with a clear protective topcoat.

This project called for a warmer floor than the gray and charcoal systems used in many garages. The tan, beige and gray combination worked with the warmer tones of the space while still providing the variation and finished appearance of a full-flake system.

Learn more about garage floor coatings, flake floor systems and solid color coatings.

Patio & Outdoor Concrete Coatings in Colleyville

Existing concrete patios, covered patios and pool decks can be coated without tearing out the slab. Outdoor systems are selected for sun, weather, drainage and wet traction, and the concrete is mechanically prepared and repaired first.

Learn more about patio and outdoor concrete coatings.

Commercial & Industrial Floor Coatings in Colleyville

A commercial floor is specified around traffic, vehicles and equipment, cleaning methods, chemical exposure, traction, the condition of the concrete, facility access and return-to-service time. Larger projects can be phased so a facility keeps operating.

Commercial work in Colleyville includes warehouses, automotive and service shops, retail spaces, offices, maintenance facilities, light industrial spaces and property management portfolios.

Warehouse floor coatings are large-area systems for storage and distribution floors.

See commercial floor coatings and warehouse floor coatings.

Decorative & Specialty Floor Systems in Colleyville

The finish is chosen separately from the space, and each one behaves differently once it is installed:

Concrete Coating Systems Available in Colleyville

Concrete Surface Preparation

Surface preparation decides how well a coating lasts. We use diamond grinding to remove contamination, weak surface material and incompatible coatings, and we repair cracks and pits before anything is installed.

Grinding does not fix everything. Moisture, oil contamination and structural problems are assessed at your estimate, because a coating applied over them can fail. See concrete grinding & preparation.

Concrete Floors and Properties in Colleyville

Larger and oversized residential garages are common in the type of Colleyville properties we work in.

Recent Epoxy Panda Projects in Colleyville

  • Tan Flake Workshop Garage

Colleyville Concrete Coating FAQs

Do you install garage floor coatings in Colleyville?

Yes. Epoxy Panda installs garage floor coatings in Colleyville, Texas. Every garage is mechanically prepared first, and the system is chosen for how the garage is used.

Do you install commercial floor coatings in Colleyville?

Yes. Epoxy Panda installs commercial floor coatings in Colleyville, Texas. The system is specified around traffic, cleaning, chemical exposure and how the facility operates, and larger projects can be phased around ongoing operations.

What coating is best for a Colleyville garage?

It depends on the concrete, how the garage is used and the look you want. Epoxy Panda’s standard garage system is a resin base coat (epoxy or polyurea), a full decorative flake broadcast and a polyaspartic clear topcoat. A solid color system suits a uniform look without flake.

Do you grind concrete before coating it?

Yes. Mechanical preparation such as diamond grinding is a standard part of Epoxy Panda coating projects, because a coating bonds to prepared concrete, not to dust, old sealer or weak surface material.

How do I get an estimate for a project in Colleyville?

Fill out the online estimate form. We text to confirm and ask for a few photos, then visit for a free in-person consultation and give you a written estimate.

Concrete Coating Service Areas Near Colleyville

Get a Free Concrete Coating Estimate

Tell us about your Colleyville project. We text to confirm, ask for a few photos, then visit for a free in-person consultation and a written estimate.